Toagosei America Inc. offers a selection of black powder coatings designed for demanding applications. These coatings are particularly suited for automotive components, including metal windshield wiper blades and arms, as well as exterior building panels and trim parts. Engineered to deliver both durability and visual appeal, our solutions support the needs of both automotive OEMs and the aftermarket sector.
Aronpowder E-1
Aronpowder E-1 is a one-part, black-pigmented epoxy-based powder coating. This coating is a long-time proven solution for coating compact car wiper arms and blades.
Key features and benefits of Aronpowder E-1 include:
- One-coat system application
- Full-matte finish with a velvety smooth surface, even in thin films
- Strong adhesion to aluminum and steel parts
- Rapid curing with minimal VOCs and odor
- Reduced defects, leading to lower recoating costs
Applying Aronpowder E-1 involves the following steps:
- Substrate Pretreatment: For optimal adhesion, the substrate surface must be clean. Aronpowder E-1 performs best with Zinc Phosphate (B952) or Iron Phosphate (B1000) pretreatment on steel substrates.
- Application: Aronpowder E-1 can be applied using manual or automatic electrostatic spray systems. The powder should be fluidized to ensure consistent application and appearance. Additionally, any unused powder can be reclaimed and recycled through the coating system for minimal waste.
- Curing: Curing Aronpowder E-1 requires specific time and temperature control. It is recommended to cure it for 15 minutes at 400°F or 20 minutes at 360°F.
Aronpowder P-1
Aronpowder P-1 is a one-part, black-pigmented polyester-based powder coating. It is designed as a one-coat system for middle-grade automotive wiper arms and blades.
Key features and benefits of Aronpowder P-1 include:
- High durability, eliminating the need for electrodeposition pre-painting
- Semi-gloss finish with a smooth surface, even in thin films
- Excellent adhesion to aluminum and steel parts
- Fast curing with low VOCs and odor
Applying Aronpowder P-1 involves the following steps:
- Substrate Pretreatment: Substrate surfaces must be clean before applying Aronpowder P-1. Zinc Phosphate (B952) or Iron Phosphate (B1000) pretreatment on steel is recommended for optimal performance.
- Application: Aronpowder P-1 can be applied with manual or automatic electrostatic spray systems, with fluidized application recommended for consistency. All unused powder can be reclaimed and reused.
- Curing: Aronpowder P-1 should cure for 15 minutes at 400°F or 20 minutes at 360°F.
Aronpowder P-2
Aronpowder P-2 is a one-part, black-pigmented polyester powder coating. It is designed as a two-coat system for upper-grade automotive wiper arms and blades.
Key features and benefits of Aronpowder P-2 include:
- Exceptional durability in SWOM, XWOM, and salt spray tests
- Semi-gloss finish with a smooth surface
- Strong adhesion to aluminum and steel parts
- Rapid cure with minimal VOCs and odor
Applying Aronpowder P-2 involves the following steps:
- Substrate Pretreatment: For optimal results, the substrate must be clean. Aronpowder P-2 performs best on steel or aluminum with electrodeposition pre-painting.
- Application: Aronpowder P-2 can be applied via manual or automatic electrostatic spray systems. Fluidized application is recommended for consistency. Excess powder can be reclaimed and reused.
- Curing: It is recommended to cure Aronpowder P-2 for 15 minutes at 400°F or 20 minutes at 360°F
Aronpowder P-3
Aronpowder P-3 is a one-part, black-pigmented polyester-based powder coating. Engineered for top-grade automotive wiper systems, this powder coating is an enhanced version of Aronpowder P-2, offering improved weatherability.
Key features and benefits of Aronpowder P-3 include:
- Outstanding durability in SWOM, XWOM, and salt spray tests
- Semi-gloss finish with a smooth surface
- Excellent adhesion to aluminum and steel parts
- Fast curing with low VOCs and odor
Applying Aronpowder P-3 involves the following steps:
- Substrate Pretreatment: Substrate surfaces must be clean before application. Aronpowder P-3 provides optimal performance on steel and aluminum with electrodeposition pre-painting.
- Application: It can be applied with manual or automatic electrostatic spray systems. Fluidized application is recommended for consistency. Unused powder is reclaimable for reuse.
- Curing: Aronpowder P-3 should be cured for 15 minutes at 400°F or 20 minutes at 360°F.
Contact Toagosei America Inc. for Powder Coatings
Toagosei America Inc. offers a range of powder coating solutions, including polyester-based and epoxy-based options. Our Aronpowder products, including E-1, P-1, P-2, and P-3, are formulated to meet the demanding requirements of the automotive industry. With a focus on performance, durability, and application-specific needs, Toagosei America Inc. is your go-to partner for high-quality powder coating solutions.
Contact us today to learn more about our polyester and epoxy powder coatings and how they can benefit your specific application.